Fluid Bed Drying Equipment

High-effective Fluid-bed Dryer

No.:
Brand :
Weight:

Detailed

1.GFG High-effective Fluid-bed Dryer Introduction

After heating the air purification, introduced from the bottom induced draft fan through the hole hopper screen. In the studio, by mixing and fluidization negative pressure is formed, after the water is evaporated and removed Fast, Fast drying material.

2.Features

※ Fluidized bed is round structure, to avoid dead ends.

※ The hopper stirring to avoid agglomeration of raw material and forming canal of flow when dry.

※ Use Overturning discharge, facilitate prompt and thorough,

※ Seal negative pressure operation, the gas through the filter.

※ Drying speed, temperature uniformity, each batch of drying time is generally 15-45 minutes.

3.Technical Specifications

Project		Unit	Model
Project		Unit	60	100	120	150	200	300	500
Production capacity		Kg	30-60	60-100	80-120	100-150	120-200	200-300	300-500
Material container	diameter	mm	1000	1000	1200	1300	1400	1600	1800
Material container	Volume	L	220	330	420	500	670	1000	1500
Fan	Wind	M3 /h	2361	3488	4000	4901	6032	7800	10800
	Wind pressure	mmH2O	594	533	533	679	787	950	950
	power	kw	7.5	11	15	18.5	22	30	45
Mixing power		kw	0.55	0.55	0.55	0.55	0.75	0.75	1.1
Stirring speed		r.p.m	11
Steam consumption		kg/h	141	170	210	240	282	366	451
Operating time		min	15-45(depending on material availability)
Host height	Square	mm	2750	2850	2850	2900	3100	3300	3650
Host height	Round	mm	2700	2900	2900	2900	3100	3600	3850