Vacuum Drying Equipment
1.SZG Double Conical Vacuum Dryer Introduction
SZG Double-cone rotating vacuum Dryer double cone rotating tank, the tank in the vacuum state, to the jacket into a thermal oil or hot water heating, heat through the tank wall contact with the wet material contact. Evaporation of water vapor or other gases after wet material absorbs heat through the vacuum pump through the vacuum exhaust pipe is pumped. Since the tank body in a vacuum state, and the rotating of tank so that the material constant up and down, inside and outside the flip, it accelerated the drying rate of materials, improve drying rate, to achieve uniform drying purposes.
Double-cone rotating vacuum Dryer is a hybrid - drying in one of the new Dryer. The condenser, vacuum pump and supporting Dryer, vacuum drying device components. (Such as do not need solvent recovery condenser or may not) advanced design of this machine, the internal structure of simple, easy to clean, discharge all raw material, easy to operate. Can reduce labor intensity and improve the working environment. At the same time the rotation of container materials also rotated, but the wall does not plot material, so heat transfer coefficient, drying rate, not only save energy, but full uniform drying, good quality. It can be widely used in pharmaceutical, chemical, food, dye and other industries drying.
Tank volume (L)
The maximum loading volume（L）
The maximum loading weight(kg)
Motor Powerk w)
Tank design pressure （MPa）
Jacket design pressure(MPa)
This machine is suitable for pharmaceutical, food, chemical and other industries powder, vacuum drying and mixing of granular materials, especially suitable for drying by the following.
※We can not accept the high temperature heat-sensitive materials to be recovered material
※Solvents and toxic gases
※Easily oxidized, hazardous materials
※Required for crystalline materials
※Requires a very low residual volatile matter content material
1.What is the minimum quantity to make the order?
Just only one set is OK. (although it is the lab mini model.)To meet the customer's needs it our aim.
2.How about the delivery after the contract effects?
Once the contract is ok, we will make the schedule order, and usually speaking, 30-45 days is needed, for some whole product lines, it needs 75-90 days to finish the work.
3.How about the quality of your machines?
Jiacheng has been making the special machine for several years, and most of customers come from all of the world. We have the series inspection for each making schedules. And all the workers have enough experience. So the praise from the customers is our best quality.
4.How about the after-sale service?
We will offer the free installation on site and the engineer will teach the operator how to operate the machine well and how to make the maintenance in future. Also we will provide the spare parts for whole life.
5.Would you please make the test for me because we are doing the research?
All the customers are welcome to take your raw material to make the test in Kaide. We also want to learn more knowledge from the different industry and keep advance for every material.