Wet Powder Extruding Equipment

Vertical Fluidizing Granulator

No.:
Brand :
Weight:

Detailed

1.FL Vertical Fluidizing Granulator Introduction

A.The machine is mainly used for the operations of mixing, granulating, drying and coating of granule “Top Spraying”, etc of powder material in pharmaceutical industry, foodstuff industry, chemical industry, etc. Such as granule of tablet, granule for quick resolving drinking, condiment.

B.The machine is designed and manufactured in accordance with JB20014-2004 《 Fluid-bed Granulator In Medicine 》

2.Features

A.By powder granulation, improve liquidity, reduce dust;

B.By powder granulation to improve its solubility;

C.Mixing, granulating, drying can be completed in one step granulation machine;

D.Made of antistatic filter cloth, equipment operation safety;

E.Setting the pressure relief hole event of an explosion, equipment personnel from harm;

F.Equipment no dead ends, lighter, faster loading and unloading, rinse, to meet the GMP standard.

1(001)

3.Technical Specifications

Project		Unit	Type
Project		Unit	3	5	15	30	60	120	200	300	500
Material container	Capacity	L	12	22	45	100	220	420	670	1000	1500
Material container	Diameter	㎜	300	400	550	700	1000	1200	1400	1600	1800
Production capacity	Least	㎏	1.5	4	10	15	30	80	100	150	250
Production capacity	maximum	㎏	4.5	6	20	45	90	160	300	450	750
Fan	Wind	m3/h	1000	1200	1400	1800	3000	4500	6000	7000	8000
	Wind pressure	㎜H2O	375	375	480	480	950	950	950	950	950
	power	kw	3	4	5.5	7.5	11	18.5	22	30	45
Steam consumption		kg/h	15	23	42	70	141	211	282	366	451
Compressed air Consumption		m3/min	0.9	0.9	0.9	0.9	1.0	1.0	1.1	1.5	1.5

Weight	kg	500	700		900	1000	1100	1300	1500	1800	2000
Steam pressure	Mpa	0.3～0.6
Temperature	℃	Water temperature can be adjusted within the range of -120 ℃
Working time	min	With dependent material properties45～90
Material yield	%	≥99
Noise	dB(A)	Fan and host isolation installation, noise≤75dB(A）
Master shape size(L×W×H)	m	1.0×0.6 ×2.1		1.2×0.7 ×2.1	1.25×0.9 ×2.5	1.6×1.1 ×2.5	1.85×1.4 ×3	2.2×1.65 ×3.3	2.34×1.7 ×3.8	2.8×2.0 ×4.0	3×2.25 ×4.4

4.Working Principle

Material powder particles in the material container (fluidized bed) was boiling in a fluidized state by the heated air is preheated and mixed after purification, the binder solution sprayed into the spray, so some particles to contain a binder pellets, since the hot air drying of materials continue to make pellets in the water evaporates, the adhesive sets, this process is repeated continuously, form an ideal, uniform microporous spherical particles.